High power N10 and N20 motors – 750 to 3600 rpm on 2S (1-piece)

(1 customer review)


N10 motors are smaller and lighter than N20 motors. Turnabot N10 motors are more powerful than “most” N20 motors.

*2022 Update* – we are thrilled to announce that we now have what we believe are the most powerful commercially available N20 motors in the world! Also, some of our motors now have their RPM laser etched on the case!

Price is for 1 (one) motor.

Torque and stall current have a near linear relationship. For comparison, cheap N20 motors stall as low as 0.25 amps on 2S. Decent N20 motors stall at 0.45 amps, and “good” motors generally stall near 0.90 amps. Before we had the latest batch Turnabot N20 motors made the “best” N20s we were aware of were rated at 1.60 amps and were appropriately expensive.

Turnabot 1200, 1800, 2400, and 3600 rpm N10 motors stall at 1.0 amp on 2S. (this 1.0 amp “nominal” (average) is also the “safe” limit for running two of them on ESCs with 2.0 amp max ratings)

Turnabot 1400 rpm N20 motors stall at an incredible 2.0+ amps on 2S (it is VERY hard to stall these in insect weight drive so using one of them per side on 2.0 amp ESCs should be okay. These are NOT rated to run two of them per side on a 2.0 amp ESC)

Turnabot 3000 rpm N20 motors stall at 1.0a on 2S.

Please note that even the 3600rpm N10 motors have enough torque that with four of the stickiest tires we’re aware of, a 2S lipo at it’s minimum suggested voltage (7.4v), and while carrying another 150g bot (300g on the wheels) these will still spin all four tires. The lower rpm motors can spin four sticky tires even in 1lb bots.

This much power in this small of a package means these motors should NOT be stalled for any length of time.

***We have a LOT of motors that are not listed here in our “standard offerings.” If you need any specific Nx0 motor / rpm / power / stall current, please reach out to us and we’ll see if we have something that will work for you.***

SKU: N/A Category: Tag:

Additional information

Weight 8.4 g

N10, N20


700, 800, 1200, 1400, 1650, 1800, 2000, 2200, 3000, 3600

1 review for High power N10 and N20 motors – 750 to 3600 rpm on 2S (1-piece)

  1. Wes (verified owner)

    These N10s are plenty powerful, and so far very reliable! I use a pair of 1800RPM motors in my fairyweight Flying Doorstop, and 4 of them in my antweight Death Punch. They run on a Malenki Nano no problem even with 2 motors per channel. Not only do you get good power and speed, but you shave that little bit of space and weight by going N10 instead of N20. I cannot recommend these enough

Add a review

Your email address will not be published.

These N10 motors are far more powerful than “normal” N20 motors.